In this pge you can have an answer to the most common questions we receive. If you do not find what are you looking for please feel free to be in touch with us: commercial@anistek.com
The servopress CNC1000 can be equipped with several options and accessories to minimize the mold change downtime. In ideal conditions the mold change can be performed in less than 20 minutes. Please consider that will be required some time to replace the coil on the decoiler, taking 10 minutes, and also the staking unit setup, approx 15 minutes. A total change of production will require 45 minutes.
The servopress MONO500 can be equipped with several options and accessories to minimize the mold change downtime. In ideal conditions the mold change can be performed in less than 20 minutes. Please consider that will be required some time to replace the coil on the decoiler, taking 5 minutes, and also the staking unit setup, approx 5 minutes. A total change of production will require 30 minutes.
Anistek’s servopresses hase been designed to require minimal mainteinance. In addition to the normal cleaning of the machines, the model CNC1000 require to be feeded with approx 5 liter of lubrication oil per year and some grease; the model MONO500 requires to be greased once a year.
The percentage of scrap (web, skeleton, etc..) of a mold may vary according the number of the cavities of the mold, the kind of servopress and the number of the cavity. Anistek is able to provide optimal use of the alufoil to minimize the scrap generated from the blank shape.
The servopress CNC1000 can be equipped with several options and accessories to minimize the mold change downtime. In ideal conditions the mold change can be performed in less than 20 minutes. Please consider that will be required some time to replace the coil on the decoiler, taking 10 minutes, and also the staking unit setup, approx 15 minutes. A total change of production will require 45 minutes.
The servopress MONO500 can be equipped with several options and accessories to minimize the mold change downtime. In ideal conditions the mold change can be performed in less than 20 minutes. Please consider that will be required some time to replace the coil on the decoiler, taking 5 minutes, and also the staking unit setup, approx 5 minutes. A total change of production will require 30 minutes.
Anistek’s servopresses hase been designed to require minimal mainteinance. In addition to the normal cleaning of the machines, the model CNC1000 require to be feeded with approx 5 liter of lubrication oil per year and some grease; the model MONO500 requires to be greased once a year.
The percentage of scrap (web, skeleton, etc..) of a mold may vary according the number of the cavities of the mold, the kind of servopress and the number of the cavity. Anistek is able to provide optimal use of the alufoil to minimize the scrap generated from the blank shape.
